The CP (Compact Power) series is a complete, 1U-high distributed power system of rectifier modules. The series utilizes the latest, cost-optimized technology to provide a regulated, single-output voltage of -54VDC. The rectifiers provide high efficiency and power density, and they are available in both universal AC and a wide range of DC input voltage configurations.
Benefits
1U profile with only 13.85″ depth.
Power densities in excess of 40W/in3.
Constant current characteristic.
N+1 redundancy/hot-swap operation.
Up to 5VSB @ 2A standby voltage.
Dual I2C and RS485 interfaces.
Active load sharing, remote on/off and sense functions.
The CLP-series of highly dense, open-frame, fanless power supplies provide high power availability and reliability in a compact footprint. With the ability to adapt to either forced air or conductive plate cooling, the CLP AC/DC power supplies offer design flexibility for OEMs when designing their end applications. The power supplies offer greater than 90% peak efficiency.
The simple, but powerful, design architecture of the CLP-series power supplies makes optimal use of components, their placement, and electrical routing techniques to provide more power in less space. This combination of power performance and minimal footprint make the CLP product family ideal for applications including industrial equipment, telecommunications equipment, robotics, 3D printers, and network routers and switches.
Benefits
Compact size: 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in).
Universal AC input range (90 – 264VAC).
Output voltage of 12V, 24V, 28V.
Maximum output current of 16.7A@ 12Vout (200W), 12.5A @ 12Vout (150W), 8.3A @ 24Vout (200W), 7.1A @ 28Vout (200W).
Standby output of 5V @ 0.25A (select models).
High efficiency with 80 PLUS Gold Certification.
Full load capability at 50 C and 1m/s (200LFM) airflow with derating at higher temperatures or lower airflows.
Remote on/off (select models).
Output overcurrent protection (non-latching).
Overtemperature protection.
Output overvoltage protection.
Up to 12ms of hold-up time.
Ability to parallel power supplies with current sharing (select models).
Active power factor corrected input.
Conducted EMI – meets CISPR22 (EN55022) and FCC Class A/B requirements.
Compliant to RoHS EU Directive 2002/95/EC.
UL and ULC approved to UL/CSA60950-1, TUV (EN60950-1), CE Mark (for LVD) and CB Report available.
ISO** 9001 and ISO 14001 certified manufacturing facilities.
CLP Embedded Power Applications
Test and measurement equipment
Embedded designs – printers, noninvasive medical devices, small LED display signage.
Networking devices – wireless telecom and datacom equipment.
The fanless, compact, half-U high CCR-Series rectifiers offer alternative cooling approaches including liquid, conduction, convection or forced air for end applications where reliability and noiseless operation are essential. In a sleek form factor, the CCR AC/DC power supplies reduce the real estate needed for power conversion, making them ideal for use in hard-to-reach applications. They also offer enhanced scalability as multiple units can be configured in an N+N redundant mode.
